What software do state inspection stations use to track inspection stickers?
A lot of state inspection stations still track their stickers in a logbook, a spreadsheet, or a drawer that somebody counts when the state is due to visit. Software built for inspection stations, like GarageForge, replaces that with a record of every sticker from the day the batch arrives to the VIN it ends up on, and that record is what you pull up when an auditor asks.
In Pennsylvania, and in many other states, the state's own inspection system records the inspections you report. It doesn't keep your shop's count of blank stickers on the shelf, which tech pulled the last one, or that number 4471 went in the trash after it tore. That gap is where most sticker discrepancies come from.
What a sticker record has to show
When an auditor sits down at your counter, the question is simple: account for every sticker you were issued. To answer it without sweating, you need five things on every sticker.
- The sticker number and the batch it came in with, plus the date you received it.
- Its current status: in stock, issued, voided, or missing.
- If issued, the inspection it was issued on, the VIN, the date, and the inspector.
- If voided or missing, when that happened and a note on why.
- Who made each of those entries, and when.
A logbook gets you items one and three, on a good day. A spreadsheet gets you one through four, but nothing about who changed what, and nothing stops a line from being quietly edited after the fact. The fifth item is the one that makes the record believable, and it's the one paper is worst at.
Where "the state terminal plus a notebook" falls short
I owned an inspection station in Pennsylvania. The state system was fine at what it did. The trouble was everything that happened between the box of stickers arriving and the sticker going on the windshield.
A tech pulls two stickers because one tore. A customer fails, comes back next week, and the sticker that was set aside for him gets used on somebody else. Somebody writes a number down wrong in the book. None of that's fraud. All of it shows up as a discrepancy when the count doesn't match the records, and now you're explaining it to a person who has heard that story before.
The fix isn't a better notebook. It's a system where a sticker can't change status without a timestamp and a name attached to the change.
What inspection station software does
GarageForge is built around the inspection lane, so sticker tracking is the first thing in it, not an add-on.
You receive stickers by entering the batch, one number or a whole range at once. Each one starts as "in stock." When a tech finishes an inspection and the vehicle passes, they pull the next sticker from inventory inside the inspection record, and the sticker flips to "issued" with the VIN, the date, and their name on it. If a sticker tears or gets lost, you mark it voided or missing with a note, and that entry is timestamped too.
Every one of those changes goes into an audit trail. The sticker list filters by status, and any sticker number opens its full history. When the auditor asks about number 4471, you type it in and read the answer off the screen.
The same record is tied to the vehicle. Decode a VIN and you see every inspection, every repair, and every sticker that car has had at your shop, even if it changed owners along the way.
Sticker tracking is on every plan
Sticker inventory and the audit trail are included on the $59 a month Starter plan, not held back for a higher tier. Starter is one user and 75 repair orders a month with unlimited customers, vehicles, and inspections. On Starter, every entry is logged under that one login. If more than one person issues stickers, Pro ($99, up to five users) gives each tech their own login, so the trail shows exactly who did what. Shop+ is $179 with unlimited users.
Every plan is month to month with a 14-day free trial and no credit card to start. If you want a comparison against general shop software, Shopmonkey's and Tekmetric's entry plans run $199 to $239 a month as of October 2026, and neither lists inspection sticker inventory as a feature on its pricing page.
What to do this week, even without software
If you aren't ready to change anything, at least do these three things. Write the batch number and received date on the inside of the sticker box. Make every void a written line, not a sticker in the trash. And count the drawer against your records on the same day every week, so the gap is one week old instead of six months old when you find it.
If you'd rather have the system do that for you, start a free GarageForge trial and enter your current batch. Entering it takes about ten minutes for most stations.
Questions about your setup? Email info@mygarageforge.com.
Questions people ask
Does the state inspection terminal track my sticker inventory?
In most states, not the way you need it to. The state system records the inspections you report. It generally won't tell you a sticker is missing from your drawer before an auditor does. Check what your state's system shows, but plan on the station keeping its own count.
Can I track inspection stickers in a spreadsheet?
You can, and it beats a logbook. The problem is that a spreadsheet has no timestamps, no record of who changed a line, and no link to the inspection or the VIN. Those are the three things you'll want when the count doesn't match.
What does GarageForge do with stickers?
Every sticker is logged from the batch you received to the vehicle it went on, with a status of in stock, issued, voided or missing, and a timestamped note of who did what. Issuing a sticker ties it to the inspection record and the VIN. It's included on every plan, from $59 a month.
Is GarageForge only for Pennsylvania stations?
No. The state program settings cover safety and emissions programs in other states, so it isn't tied to Pennsylvania. I ran a PA station, which is why it started there. If you're somewhere else, email info@mygarageforge.com and I'll tell you straight how well it fits your program.
Try GarageForge free for 14 days
Sticker inventory, audit trail and inspection reminders from $59 a month. No credit card to start.
Start your free trial →